Double-Stator Permanent Magnet Vernier Machine: A Review

Document Type : Research Paper

Author

Department of Electrical and Computer Engineering, Imam Mohammad Bagher College, Technical and Vocational University, Sari, Iran

Abstract

This paper reviews the current state of the double-stator permanent magnet vernier (DS-PMV) machine technology. At first, the recent advances in PMV machines are presented. In the following, the classification of various PMV machines' configuration is elucidated. In general, this review covers the principle of better understanding of the novel PMV machines' topologies using different windings configurations, flux modulation poles and stator/rotor structures.
 

Keywords

Main Subjects

References

  1. Ahmad and O.Suk Ro, ‘‘Analysis and Design Optimization of V-Shaped Permanent Magnet Vernier Motor for Torque Density Improvement,’’ IEEE Access. Ind. Appl ,vol. 9, pp. 13542- 13552, Jun. 2021.
  2. Li, K. T. Chau, J. Z. Jiang, Chunhua Liu, and Wenlong Li, ‘‘A New Efficient Permanent-Magnet Vernier Machine for Wind Power Generation,’’ IEEE Trans. Mag. Appl ,vol. 46, no. 6, pp. 1475-1478, Jun. 2010.
  3. Wenbo Liu, Jiyao Wang, and Thomas A. Lipo, ‘‘A Consequent Pole Single Rotor Single Stator Vernier Design to Effectively Improve Torque Density of an Industrial PM Drive,’’ IEEE Trans. Ind Electronics. Appl, Early Access, Mar. 2022.
  4. Baloch, K. T. Chau, J. Z. Jiang, Chunhua Liu, and B. Kwon, ‘‘A Distributed Winding Wound Field Pole-Changing Vernier Machine for Variable Speed Application,’’ IEEE Trans. Mag. Appl,vol. 55, Mar. 2019.
  5. Yujun Shi and T. W. Ching, ‘‘Power Factor Analysis of Dual-Stator Permanent Magnet Vernier Motor with Consideration on Turn-Number Assignment of Inner and Outer Stator Windings,’’ IEEE Trans. Mag. Appl,vol. 57, Feb. 2021.
  6. Ho, S. Niu, and W. Fu, “Analytical analysis and implementation of a low-speed high-torque permanent magnet vernier in-wheel motor for electric vehicle,” AIP Journal. Physics., vol. 111, March.2012.
  7. Xing Zhao and Shuangxia Niu, ‘‘A New Slot-PM Vernier Reluctance Machine with Enhanced Zero Sequence Current Excitation for Electric Vehicle Propulsion,’’ IEEE Trans. Industrial Electronics. Appl,vol. 67, Mar. 2020.
  8. Shaofeng Jia, Deliang Liang, Wubin Kong, Ronghai Qu, Zixiang Yu, Dawei Li, and Peng Kou,‘‘ A High Torque Density Concentrated Winding Vernier Reluctance Machine With DC-Biased Current,’’ IEEE Trans. Mag. Appl,vol. 54, Nov. 2018.
  9. Liang Xu, and Wenxiang Zhao, ‘‘Design Optimization of a Spoke-Type Permanent-Magnet Vernier Machine for Torque Density and Power Factor Improvement,’’ IEEE Trans. Vehicular Technology. Appl,vol. 68, April. 2019.
  10. Noman Baloch, and Byung-il Kwon, ‘‘A Distributed Winding Wound Field Pole-Changing Vernier Machine for Variable Speed Application,’’ IEEE Trans. Mag. Appl,vol. 55, July. 2019.
  11. Wenbo Liu, and Thomas A. Lipo, ‘‘Analysis of Consequent Pole Spoke Type Vernier Permanent Magnet Machine with Alternating Flux Barrier Design,’’ IEEE Trans. Ind. Appl,vol. 54, Jun. 2018.
  12. Wenbo Liu, Lizhi Sun, and Thomas A. Lipo, ‘‘On the Scaling of Consequent Pole Vernier Machines With Spoke Type Magnets,’’ 2018 IEEE Energy Conversion Congress and Exposition (ECCE). 2018.,pp. 3294 – 3301.
  13. Byungtaek Kim and Thomas A. Lipo, ‘‘Analysis of a PM Vernier Motor with Spoke Structure,’’ IEEE Trans. Ind. Appl,vol. 52, Feb. 2016.
  14. Weibing Wang, Ming Cheng, Xianglin Li, Minghao Tong, and Ji Q, ‘‘Nonlinear Analytical Solution of Magnetic Field and Performances of a Spoke Array Vernier Permanent Magnet Machine,’’ IEEE Trans. Energy Conv. Appl,vol. 36, March. 2021.
  15. Xianglin Li, Shiyang Yu, and Yubin Wang, ‘‘A Novel HTS Claw-Pole Vernier Machine Using Single Excitation Unit With Stationary Seal,’’ IEEE Trans.Superconductivity. Appl,vol. 29, Aug. 2019.
  16. Hamza Ahmad, and Jong-Suk Ro, ‘‘Analysis and Design Optimization of V-Shaped Permanent Magnet Vernier Motor for Torque Density Improvement,’’ IEEE Access. Appl,vol. 9, Jan. 2021.
  17. Dingying Wu, Zixuan Xiang, Xiaoyong Zhu, Li Quan, Min Jiang, and Yongfeng Liu, ‘‘Optimization Design of Power Factor for an In-Wheel Vernier PM Machine from Perspective of Air-gap Harmonic Modulation,’’ IEEE Trans. Ind Electronics. Appl,vol. 68, Oct. 2021.
  18. Arish, Maarten J. Kamper, J. Z. Jiang, and Rong-Jie Wang, ‘‘Electromagnetic Analysis of Flux Barrier U-Shaped Permanent Magnet Vernier Motor,’’ 2021 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP), 2021 .pp. 198-204.
  19. Kangfu Xie, Dawei Li, Ronghai Qu, and Yuting Gao, ‘‘A Novel Permanent Magnet Vernier Machine with Halbach Array Magnets in Stator Slot Opening,’’ IEEE Trans. Mag. Appl,vol. 53, June. 2017.
  20. Dawei Li, Tianjie Zou, and Ronghai Qu, ‘‘Analysis of Fractional-Slot Concentrated Winding PM Vernier Machines With Regular Open-Slot Stators,’’ IEEE Trans. Ind. Appl,vol. 54, March/April. 2018.
  21. Junqin Yang, Guohai Liu, Wenxiang Zhao, Qian Chen, Yicheng Jiang, Longgang Sun, and Xiaoyong Zhu, ‘‘Quantitative Comparison for Fractional-Slot Concentrated-Winding Configurations of Permanent-Magnet Vernier Machines,’’ IEEE Trans. Mag. Appl,vol. 49, July. 2013.
  22. Liang Xu, Guohai Liu, Wenxiang Zhao, Jinghua Ji, Huawei Zhou, Wanxiang Zhao, and Tingting Jiang,‘‘ Quantitative Comparison of Integral and Fractional Slot Permanent Magnet Vernier Motors,’’ IEEE Trans. Energy Conv. Appl,vol. 30, Dec. 2015.
  23. Wenlong Li, and K.T. Chau, ‘‘Simulation of a Linear Permanent Magnet Vernier Machine for Direct-drive Wave Power Generation,’’ 2011 International Conference on Electrical Machines and Systems, 2011 .pp. 1 - 6.
  24. Jiangui Li, K. T. Chau, J. Z. Jiang, Chunhua Liu, and Wenlong Li,‘‘ A New Efficient Permanent-Magnet Vernier Machine for Wind Power Generation,’’ IEEE Trans. Mag. Appl,vol. 46, Jun. 2010.
  25. A. H. Raihan, N. J. Baker, K. J. Smith, and A. A. Almoraya,‘‘ Development and Testing of a Novel Cylindrical Permanent Magnet Linear Generator,’’ IEEE Trans. Ind. Appl,vol. 56, July-Aug. 2020.
  26. Arash Allahyari, and Hossein Torkaman,‘‘ A Novel High-Performance Consequent Pole Dual Rotor Permanent Magnet Vernier Machine,’’ IEEE Trans. Energy Conv. Appl,vol. 35, Sept. 2020.
  27. Shuangxia Niu, S. L. Ho, and W. N. Fu,‘‘ A Novel Double-Stator Double-Rotor Brushless Electrical Continuously Variable Transmission System,’’ IEEE Trans. Mag. Appl,vol. 49, July. 2013.
  28. Kaikai Guo, and Youguang Guo, ‘‘Optimization Design of Parallel Double Stator and Outer Mover Linear Rotary Permanent Magnet Machine Used for Drilling Robot,’’ 2020 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD), 2020 .pp. 1-2.
  29. Dawei Li, Ronghai Qu, Wei Xu, Jian Li, and T.A.Lipo,‘‘ Design Procedure of Dual-Stator, Spoke-Array Vernier Permanent Magnet Machines,’’ IEEE Trans. Ind. Appl,vol. 51, July-Aug. 2015.
  30. Darius Vasile Moldovan, Florin Nicolae Jurca, Claudia Steluta Marțis Paul Minciunescu, and Bogdan Vărăticeanu, ‘‘The Influence of Permanent Magnets’ Position in the Double Stator Vernier Machine’s Performances,’’ 2019 Electric Vehicles International Conference (EV), 2019 .pp. 1-5.
  31. Yiduan Chen, Weinong Fu, and Xu Weng,‘‘ A Concept of General Flux-modulated Electric Machines Based on a Unified Theory and its Application to Developing a Novel Doubly-fed Dual-stator Motor,’’ IEEE Trans. Ind Electronics. Appl,vol. 64, Dec. 2017.
  32. Jincheng Yu , Chunhua Liu, and Hang Zhao,‘‘ Design and Multi-Mode Operation of Double-Stator Toroidal-Winding PM Vernier Machine for Wind-Photovoltaic Hybrid Generation System,’’ IEEE Trans. Mag. Appl,vol. 55, July. 2019.
  33. Jincheng Yu, and Chunhua Liu,‘‘ Design of a Double-Stator Magnetless Vernier Machine for Direct-Drive Robotics,’’ IEEE Trans. Mag. Appl,vol. 54, Nov. 2018.
  34. Jincheng Yu, Chunhua Liu, Yixiao Luo, Xueqing Wang, and Zheng Wang, ‘‘Efficiency Improvement of a Double-Stator Permanent Magnet Vernier Machine for DirectDrive Robotics,’’ 2018 IEEE Energy Conversion Congress and Exposition (ECCE), 2018 .pp. 4351 - 4358.
  35. Mengxuan Lin, Dawei Li, Kangfu Xie, Xun Han, Xiang Ren, and Ronghai Qu,‘‘ Comparison between Pole-Changing and DualStator Line-Start Permanent Magnet Vernier Machine,’’ IEEE Trans. Ind. Appl,vol. 56, July-Aug. 2020.
  36. Shuangxia Niu, K. T. Chau, Jiangui Li, and Wenlong Li,‘‘ Eddy-Current Analysis of Double-Stator Inset-Type Permanent Magnet Brushless Machines,’’ IEEE Trans. Superconductivity. Appl,vol. 20, Jun. 2010.
  37. Daekyu Jang, and Junghwan Chang,‘‘ Investigation of Doubly Salient Structure for Permanent Magnet Vernier Machines using Flux Modulation Effects,’’ IEEE Trans. Energy Conv. Appl,vol. 34, Dec. 2019.
  38. Noman Baloch, Byung-il Kwon, and Yuting Gao,‘‘ Low-Cost High-Torque-Density Dual-Stator Consequent-Pole Permanent Magnet Vernier Machine,’’ IEEE Trans. Mag. Appl,vol. 54, Nov. 2018.
  39. Yujun Shi, and T. W. Ching,‘‘ Power Factor Analysis of Dual-Stator Permanent Magnet Vernier Motor with Consideration on Turn-Number Assignment of Inner and Outer Stator Windings,’’ IEEE Trans. Mag. Appl,vol. 57, Feb. 2021.
  40. Zaixin Song, Chunhua Liu, and Hang Zhao,‘‘ Quantitative Comparison of Distinct Dual-Stator Permanent Magnet Vernier Machines for Direct-Drive Applications,’’ IEEE Trans. Mag. Appl,vol. 55, July. 2019.
  41. Chunhua Liu, K. T. Chau, Jin Zhong, Wenlong Li, and Fuhua Li,‘‘ Quantitative Comparison of Double-Stator Permanent Magnet Vernier Machines With and Without HTS Bulks,’’ IEEE Trans. Superconductivity. Appl,vol. 22, Jun. 2012.
  42. Elizaveta V. Konyushenko, Ekaterina P. Kurbatova, Nikolay A. Sabaykin, Oleg N. Molokanov, Sergey V. Osipkin, and Pavel A. Kurbatov, ‘‘Analysis of Magnetic System of Dual-Stator Vernier Machine,’’ 2020 International Youth Conference on Radio Electronics, Electrical and Power Engineering (REEPE), 2020 .pp. 1 - 4.
  43. Haitao Wang, Shuhua Fang , Xiaoquan Lu, Haimiao Ni, Hui Yang, and Heyun Lin,‘‘ Analysis of a New Dual-Stator Vernier Machine With Hybrid Magnet Flux-Reversal Arrangement,’’ IEEE Trans. Superconductivity. Appl,vol. 29, March. 2019.
  44. Jincheng Yu, Chunhua Liu, Senyi Liu, and Hang Zhao,‘‘ Comparative Study of Double-Stator Interior-PM Vernier Machines Based on Electromagnetic-Structural Coupling Analysis,’’ IEEE Trans. Ind Electronics. Appl,vol. 68, Nov. 2021.
  45. Yuting Gao, Ronghai Qu, Dawei Li, Haiyang Fang, Jian Li, and Wubin Kong,‘‘ A Novel Dual-Stator Vernier Permanent Magnet Machine,’’ IEEE Trans. Mag. Appl,vol. 53, Nov. 2017.
  46. Liangliang Wei and Taketsune Nakamura,‘‘ A Novel Dual Stator Hybrid Excited Permanent Magnet Vernier Machine with Halbach-Array PMs,’’ IEEE Trans. Mag. Appl,vol. 57, Feb. 2021.
  47. Jung-Woo Kwon, and Byung- Kwon,‘‘ Investigation of Dual-Stator Spoke-Type Vernier Machine for EV Application,’’ IEEE Trans. Mag. Appl,vol. 57, July. 2018.
  48. Dawei Li, Ronghai Qu, and Jian Li, ‘‘Development and Experimental Evaluation of a Single-Winding, Dual-Stator, Spoke-Array Vernier Permanent Magnet Machines,’’ 2015 IEEE Energy Conversion Congress and Exposition (ECCE), 2015 .pp. 1885 - 1891.
  49. Fei Zhao, Thomas A. Lipo, and Byung-Il Kwon,‘‘ A Novel Dual-Stator Axial-Flux Spoke-Type Permanent Magnet Vernier Machine for Direct-Drive Applications,’’ IEEE Trans. Mag. Appl,vol. 50, Nov. 2014.
  50. Muhammad Bilal, Junaid Ikram, Adnan Fida, Syed Sabir Hussain Bukhari, Nadeem Haider, and Jong-Suk Ro,‘‘ Performance Improvement of Dual Stator Axial Flux Spoke Type Permanent Magnet Vernier Machine,’’ IEEE Access. Appl,vol. 9, April. 2021.
  51. Dawei Li, Ronghai Qu, and Thomas Lipo,‘‘ High Power Factor Vernier Permanent Magnet Machines,’’ IEEE Trans. Ind. Appl,vol. 50, Nov/Dec. 2014.
  52. Dawei Li, Ronghai Qu, Wei Xu, ,Jian Li, and T.A.Lipo,‘‘ Design Process of Dual-stator, Spoke-Array Vernier Permanent Magnet Machines,’’ 2014 IEEE Energy Conversion Congress and Exposition (ECCE), 2014 .pp. 2350 - 2357.
  53. Mudassir Raza, Wenliang Zhao, Thomas A. Lipo, and Byung-il Kwon,‘‘ Performance Comparison of Dual Airgap and Single Airgap Spoketype Permanent Magnet Vernier Machines,’’ IEEE Trans. Mag. Appl,vol. 53, June. 2017.
  54. Zhentao S. Du, and Thomas A. Lipo,‘‘ Torque Performance Comparison Between a Ferrite Magnet Vernier Motor and an Industrial Interior Permanent Magnet Machine,’’ IEEE Trans. Ind. Appl,vol. 53, May/June. 2017.
  55. S. Du, and T. A. Lipo, “An improved rotor design for dual-stator Vernier ferrite permanent magnet machines,” in IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, USA, 2017.pp. 1-8.
  56. Zhentao S. Du, and Thomas A. Lipo,‘‘ Design of An Improved Dual-Stator Ferrite Magnet Vernier Machine to Replace An Industrial Rare-Earth IPM Machine,’’ IEEE Trans. Energy Conv. Appl,vol. 34, Dec. 2019.

Files

History

  • Receive Date: 26 April 2022
  • Revise Date: 29 June 2022
  • Accept Date: 05 September 2022

Share

How to cite

Statistics